Symantec Endpoint Protection

Collect logs from Symantec Endpoint Protection with Elastic Agent.


Version	2.15.0 (View all)
Compatible Kibana version(s)	7.16.0 or higher 8.0.0 or higher
Supported Serverless project types What's this?	Security Observability
Subscription level What's this?	Basic
Level of support What's this?	Elastic

This integration is for Symantec Endpoint Protection (SEP) logs. It can be used to receive logs sent by SEP over syslog or read logs exported to a text file.

The log message is expected to be in CSV format. Syslog RFC3164 and RCF5424 headers are allowed and will be parsed if present. The data is mapped to ECS fields where applicable and the remaining fields are written under symantec_endpoint.log.*.

If a specific SEP log type is detected then event.provider is set (e.g. Agent Traffic Log).

Syslog setup steps

Enable this integration with the UDP input.
If the Symantec management server and Elastic Agent are running on different hosts then configure the integration to listen on 0.0.0.0 so that it will accept UDP packets on all interfaces. This makes the listening port reachable by the Symantec server.
Configure the Symantec management server to send syslog to the Elastic Agent that is running this integration. See Exporting data to a Syslog server in the SEP guide. Use the IP address or hostname of the Elastic Agent as the syslog server address. And use the listen port as the destination port (default is 9008).

Log file setup steps

Configure the Symantec management server to export log data to a text file. See Exporting log data to a text file.
Enable this integration with the log file input. Configure the input to read from the location where the log files are being written. The default is C:\Program Files (x86)\Symantec\Symantec Endpoint Protection Manager\data\dump\*.log.

Logs exported to text file always begin with the event time and severity columns (e.g. 2020-01-16 08:00:31,Critical,...).

Log samples

Below are samples of some different SEP log types. These examples have had their syslog header removed, but when sent over syslog these lines typically begin with an RFC3164 header like <51>Oct 3 10:38:14 symantec.endpointprotection.test SymantecServer:

Administrative Log

See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager

Site: SEPSite,Server: SEPServer,Domain: _domainOrigin,Admin: _originUser,Administrator log on succeeded

Agent Activity Log

See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager

Site: SEPSite,Server Name: exampleserver,Domain Name: Default,The management server received the client log successfully,TESTHOST01,sampleuser01,sample.example.com

Agent Behavior Log

See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager

exampleserver,216.160.83.57,Blocked,[AC7-2.1] Block scripts - Caller MD5=d73b04b0e696b0945283defa3eee4538,File Write,Begin: 2019-09-06 15:18:56,End: 2019-09-06 15:18:56,Rule: Rule Name,9552,C:/ProgramData/bomgar-scc-0x5d4162a4/bomgar-scc.exe,0,No Module Name,C:/ProgramData/bomgar-scc-0x5d4162a4/start-cb-hook.bat,User: _originUser,Domain: _domainOrigin,Action Type: ,File size (bytes): 1403,Device ID: SCSI\Disk&Ven_WDC&Prod_WD10SPCX-75KHST0\4&1d8ead7a&0&000200

Agent Packet Log

See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager

exampleserver,Local Host: 81.2.69.143,Local Port: 138,Remote Host IP: 81.2.69.144.,Remote Host Name: ,Remote Port: 138,Outbound,Application: C:/windows/system32/NTOSKRNL.EXE,Action: Blocked

Agent Proactive Detection Log

See vendor documentation:External Logging settings and log event severity levels for Endpoint Protection Manager

Potential risk found,Computer name: exampleComputer,Detection type: Heuristic,First Seen: Symantec has known about this file approximately 2 days.,Application name: Propsim,Application type: 127,"Application version: ""3",0,6,"0""",Hash type: SHA-256,Application hash: SHA#1234567890,Company name: Dummy Technologies,File size (bytes): 343040,Sensitivity: 2,Detection score: 3,COH Engine Version: 8.1.1.1,Detection Submissions No,Permitted application reason: MDS,Disposition: Bad,Download site: ,Web domain: ,Downloaded by: c:/programdata/oracle/java/javapath_target_2151967445/Host126,Prevalence: Unknown,Confidence: There is not enough information about this file to recommend it.,URL Tracking Status: Off,Risk Level: High,Detection Source: N/A,Source: Heuristic Scan,Risk name: ,Occurrences: 1,f:\user\workspace\baseline package creator\release\Host214,'',Actual action: Left alone,Requested action: Left alone,Secondary action: Left alone,Event time: 2018-02-16 08:01:33,Inserted: 2018-02-16 08:02:52,End: 2018-02-16 08:01:33,Domain: Default,Group: My Company\SEPM Group Name,Server: SEPMServer,User: exampleUser,Source computer: ,Source IP:

Agent Risk Log

See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager

Security risk found,IP Address: 1.128.3.4,Computer name: exampleComputer,Source: Auto-Protect scan,Risk name: WS.Reputation.1,Occurrences: 1,e:\removablemediaaccessutility.exe,,Actual action: All actions failed,Requested action: Process terminate pending restart,Secondary action: Left alone,Event time: 2019-09-03 08:12:25,Inserted: 2019-09-03 08:14:03,End: 2019-09-03 08:12:25,Last update time: 2019-09-03 08:14:03,Domain: SEPMServerDoman,Group: My Company\GroupName,Server: SEPMServerName,User: exampleUser,Source computer: ,Source IP: ,Disposition: Bad,Download site: ,Web domain: ,Downloaded by: e:/removablemediaaccessutility.exe,Prevalence: This file has been seen by fewer than 5 Symantec users.,Confidence: There is some evidence that this file is untrustworthy.,URL Tracking Status: On,First Seen: Symantec has known about this file approximately 2 days.,Sensitivity: ,Permitted application reason: Not on the permitted application list,Application hash: SHA#1234567890,Hash type: SHA2,Company name: Company Name,Application name: Client for Symantec Endpoint Encryption,Application version: 11.1.2 (Build 1248),Application type: 127,File size (bytes): 4193981,Category set: Malware,Category type: Insight Network Threat,Location: GD-OTS Unmanaged Client - Online,Intensive Protection Level: 0,Certificate issuer: Symantec Corporation,Certificate signer: VeriSign Class 3 Code Signing 2010 CA,Certificate thumbprint: AB6EF1497C6E1C8CCC12F06E945A4954FB41AD45,Signing timestamp: 1482491555,Certificate serial number: AB2D17E62E571F288ACB5666FD3C5230

Agent Scan Log

See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager

Scan ID: 123456789,Begin: 2020-01-31 11:35:28,End: 2020-01-31 11:45:28,Started,Duration (seconds): 600,User1: exampleUser,User2: SYSTEM,Scan started on selected drives and folders and all extensions.,Scan Complete: Risks: 0 Scanned: 916 Files/Folders/Drives Omitted: 0 Trusted Files Skipped: 0,Command: Not a command scan (),Threats: 0,Infected: 0,Total files: 916,Omitted: 0,Computer: _destinationHostname,IP Address: 1.128.3.4,Domain: exampleDomain,Group: Company\US\UserWS\Main Office,Server: SEPServer

Agent Security Log

See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager

server03,Event Description: ARP Cache Poison,Local Host IP: 0.0.0.0,Local Host MAC: 2DFF88AABBDC,Remote Host Name: ,Remote Host IP: 0.0.0.0,Remote Host MAC: AABBCCDDEEFF,Inbound,Unknown,Intrusion ID: 0,Begin: 2020-11-23 13:56:35,End Time: 2020-11-23 13:56:35,Occurrences: 1,Application: ,Location: Remote,User Name: bobby,Domain Name: local,Local Port: 0,Remote Port: 0,CIDS Signature ID: 99990,CIDS Signature string: ARP Cache Poison,CIDS Signature SubID: 0,Intrusion URL: ,Intrusion Payload URL: ,SHA-256: ,MD-5:

Agent System Log

See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager

exampleHostname,Category: 0,CVE,New content update failed to download from the management server. Remote file path: https://server:443/content/{02335EF8-ADE1-4DD8-9F0F-2A9662352E65}/190815061/xdelta190815061_To_190816061.dax,Event time: 2019-08-19 07:14:38

Agent Traffic Log

See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager

host-plaintext,Local Host IP: 216.160.83.61,Local Port: 80,Local Host MAC: CCF9E4A91226,Remote Host IP: 216.160.83.61,Remote Host Name: ,Remote Port: 33424,Remote Host MAC: 2C3AFDA79E71,TCP,Inbound,Begin: 2020-11-11 19:25:21,End Time: 2020-11-11 19:25:28,Occurrences: 4,Application: C:/WINDOWS/system32/NTOSKRNL.EXE,Rule: Block Unapproved Incoming Ports,Location: Default,User Name: sampleuser4,Domain Name: SMPL,Action: Blocked,SHA-256: 5379732000000000000000000000000000000000000000000000000000000000,MD-5: 53797320000000000000000000000000

Policy Log

See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager

Site: SEPSite,Server: exampleHostname,Domain: exampleDomain,Admin: exampleAdmin,Event Description: Policy has been edited: Edited shared Intrusion Prevention policy: SEPPolicyName,SEPPolicyName

System Log

See vendor documentation: External Logging settings and log event severity levels for Endpoint Protection Manager

Site: SEPSite,Server: exampleHostname,Symantec Endpoint Protection Manager could not update Intrusion Prevention Signatures 14.0.

Exported fields

Field	Description	Type
@timestamp	Event timestamp.	date
cloud.account.id	The cloud account or organization id used to identify different entities in a multi-tenant environment. Examples: AWS account id, Google Cloud ORG Id, or other unique identifier.	keyword
cloud.availability_zone	Availability zone in which this host is running.	keyword
cloud.image.id	Image ID for the cloud instance.	keyword
cloud.instance.id	Instance ID of the host machine.	keyword
cloud.instance.name	Instance name of the host machine.	keyword
cloud.machine.type	Machine type of the host machine.	keyword
cloud.project.id	Name of the project in Google Cloud.	keyword
cloud.provider	Name of the cloud provider. Example values are aws, azure, gcp, or digitalocean.	keyword
cloud.region	Region in which this host is running.	keyword
container.id	Unique container id.	keyword
container.image.name	Name of the image the container was built on.	keyword
container.labels	Image labels.	object
container.name	Container name.	keyword
data_stream.dataset	Data stream dataset.	constant_keyword
data_stream.namespace	Data stream namespace.	constant_keyword
data_stream.type	Data stream type.	constant_keyword
destination.address	Some event destination addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the `.address` field. Then it should be duplicated to `.ip` or `.domain`, depending on which one it is.	keyword
destination.as.number	Unique number allocated to the autonomous system. The autonomous system number (ASN) uniquely identifies each network on the Internet.	long
destination.as.organization.name	Organization name.	keyword
destination.as.organization.name.text	Multi-field of `destination.as.organization.name`.	match_only_text
destination.domain	The domain name of the destination system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment.	keyword
destination.geo.city_name	City name.	keyword
destination.geo.continent_name	Name of the continent.	keyword
destination.geo.country_iso_code	Country ISO code.	keyword
destination.geo.country_name	Country name.	keyword
destination.geo.location	Longitude and latitude.	geo_point
destination.geo.name	User-defined description of a location, at the level of granularity they care about. Could be the name of their data centers, the floor number, if this describes a local physical entity, city names. Not typically used in automated geolocation.	keyword
destination.geo.region_iso_code	Region ISO code.	keyword
destination.geo.region_name	Region name.	keyword
destination.ip	IP address of the destination (IPv4 or IPv6).	ip
destination.mac	MAC address of the destination. The notation format from RFC 7042 is suggested: Each octet (that is, 8-bit byte) is represented by two [uppercase] hexadecimal digits giving the value of the octet as an unsigned integer. Successive octets are separated by a hyphen.	keyword
destination.packets	Packets sent from the destination to the source.	long
destination.port	Port of the destination.	long
ecs.version	ECS version this event conforms to. `ecs.version` is a required field and must exist in all events. When querying across multiple indices -- which may conform to slightly different ECS versions -- this field lets integrations adjust to the schema version of the events.	keyword
error.message	Error message.	match_only_text
event.category	This is one of four ECS Categorization Fields, and indicates the second level in the ECS category hierarchy. `event.category` represents the "big buckets" of ECS categories. For example, filtering on `event.category:process` yields all events relating to process activity. This field is closely related to `event.type`, which is used as a subcategory. This field is an array. This will allow proper categorization of some events that fall in multiple categories.	keyword
event.dataset	Name of the dataset.	constant_keyword
event.ingested	Timestamp when an event arrived in the central data store. This is different from `@timestamp`, which is when the event originally occurred. It's also different from `event.created`, which is meant to capture the first time an agent saw the event. In normal conditions, assuming no tampering, the timestamps should chronologically look like this: `@timestamp` < `event.created` < `event.ingested`.	date
event.kind	This is one of four ECS Categorization Fields, and indicates the highest level in the ECS category hierarchy. `event.kind` gives high-level information about what type of information the event contains, without being specific to the contents of the event. For example, values of this field distinguish alert events from metric events. The value of this field can be used to inform how these kinds of events should be handled. They may warrant different retention, different access control, it may also help understand whether the data is coming in at a regular interval or not.	keyword
event.module	Name of the module this data is coming from.	constant_keyword
event.start	`event.start` contains the date when the event started or when the activity was first observed.	date
event.type	This is one of four ECS Categorization Fields, and indicates the third level in the ECS category hierarchy. `event.type` represents a categorization "sub-bucket" that, when used along with the `event.category` field values, enables filtering events down to a level appropriate for single visualization. This field is an array. This will allow proper categorization of some events that fall in multiple event types.	keyword
file.hash.sha1	SHA1 hash.	keyword
file.name	Name of the file including the extension, without the directory.	keyword
file.path	Full path to the file, including the file name. It should include the drive letter, when appropriate.	keyword
file.path.text	Multi-field of `file.path`.	match_only_text
file.pe.company	Internal company name of the file, provided at compile-time.	keyword
file.pe.file_version	Internal version of the file, provided at compile-time.	keyword
file.pe.product	Internal product name of the file, provided at compile-time.	keyword
file.size	File size in bytes. Only relevant when `file.type` is "file".	long
file.x509.issuer.common_name	List of common name (CN) of issuing certificate authority.	keyword
file.x509.not_before	Time at which the certificate is first considered valid.	date
file.x509.serial_number	Unique serial number issued by the certificate authority. For consistency, if this value is alphanumeric, it should be formatted without colons and uppercase characters.	keyword
host.architecture	Operating system architecture.	keyword
host.containerized	If the host is a container.	boolean
host.domain	Name of the domain of which the host is a member. For example, on Windows this could be the host's Active Directory domain or NetBIOS domain name. For Linux this could be the domain of the host's LDAP provider.	keyword
host.hostname	Hostname of the host. It normally contains what the `hostname` command returns on the host machine.	keyword
host.id	Unique host id. As hostname is not always unique, use values that are meaningful in your environment. Example: The current usage of `beat.name`.	keyword
host.ip	Host ip addresses.	ip
host.mac	Host mac addresses.	keyword
host.name	Name of the host. It can contain what `hostname` returns on Unix systems, the fully qualified domain name, or a name specified by the user. The sender decides which value to use.	keyword
host.os.build	OS build information.	keyword
host.os.codename	OS codename, if any.	keyword
host.os.family	OS family (such as redhat, debian, freebsd, windows).	keyword
host.os.kernel	Operating system kernel version as a raw string.	keyword
host.os.name	Operating system name, without the version.	keyword
host.os.name.text	Multi-field of `host.os.name`.	text
host.os.platform	Operating system platform (such centos, ubuntu, windows).	keyword
host.os.version	Operating system version as a raw string.	keyword
host.type	Type of host. For Cloud providers this can be the machine type like `t2.medium`. If vm, this could be the container, for example, or other information meaningful in your environment.	keyword
input.type	Input type.	keyword
log.file.path	Full path to the log file this event came from, including the file name. It should include the drive letter, when appropriate. If the event wasn't read from a log file, do not populate this field.	keyword
log.level	Original log level of the log event. If the source of the event provides a log level or textual severity, this is the one that goes in `log.level`. If your source doesn't specify one, you may put your event transport's severity here (e.g. Syslog severity). Some examples are `warn`, `err`, `i`, `informational`.	keyword
log.offset	Offset of the entry in the log file.	long
log.source.address	Source address from which the log event was read / sent from.	keyword
log.syslog.appname	The device or application that originated the Syslog message, if available.	keyword
log.syslog.hostname	The hostname, FQDN, or IP of the machine that originally sent the Syslog message. This is sourced from the hostname field of the syslog header. Depending on the environment, this value may be different from the host that handled the event, especially if the host handling the events is acting as a collector.	keyword
log.syslog.priority	Syslog numeric priority of the event, if available. According to RFCs 5424 and 3164, the priority is 8 * facility + severity. This number is therefore expected to contain a value between 0 and 191.	long
log.syslog.process.name	Deprecated. Use the ECS log.syslog.appname field.	alias
log.syslog.process.pid	Deprecated. Use the ECS log.syslog.procid field.	long
log.syslog.procid	The process name or ID that originated the Syslog message, if available.	keyword
log.syslog.structured_data	Structured data expressed in RFC 5424 messages, if available. These are key-value pairs formed from the structured data portion of the syslog message, as defined in RFC 5424 Section 6.3.	flattened
log.syslog.version	The version of the Syslog protocol specification. Only applicable for RFC 5424 messages.	keyword
message	For log events the message field contains the log message, optimized for viewing in a log viewer. For structured logs without an original message field, other fields can be concatenated to form a human-readable summary of the event. If multiple messages exist, they can be combined into one message.	match_only_text
network.community_id	A hash of source and destination IPs and ports, as well as the protocol used in a communication. This is a tool-agnostic standard to identify flows. Learn more at https://github.com/corelight/community-id-spec.	keyword
network.direction	Direction of the network traffic. When mapping events from a host-based monitoring context, populate this field from the host's point of view, using the values "ingress" or "egress". When mapping events from a network or perimeter-based monitoring context, populate this field from the point of view of the network perimeter, using the values "inbound", "outbound", "internal" or "external". Note that "internal" is not crossing perimeter boundaries, and is meant to describe communication between two hosts within the perimeter. Note also that "external" is meant to describe traffic between two hosts that are external to the perimeter. This could for example be useful for ISPs or VPN service providers.	keyword
network.transport	Same as network.iana_number, but instead using the Keyword name of the transport layer (udp, tcp, ipv6-icmp, etc.) The field value must be normalized to lowercase for querying.	keyword
network.type	In the OSI Model this would be the Network Layer. ipv4, ipv6, ipsec, pim, etc The field value must be normalized to lowercase for querying.	keyword
observer.product	The product name of the observer.	constant_keyword
observer.type	The type of the observer the data is coming from.	constant_keyword
observer.vendor	Vendor name of the observer.	constant_keyword
process.executable	Absolute path to the process executable.	keyword
process.executable.text	Multi-field of `process.executable`.	match_only_text
process.hash.md5	MD5 hash.	keyword
process.hash.sha256	SHA256 hash.	keyword
process.name	Process name. Sometimes called program name or similar.	keyword
process.name.text	Multi-field of `process.name`.	match_only_text
process.pid	Process id.	long
related.hash	All the hashes seen on your event. Populating this field, then using it to search for hashes can help in situations where you're unsure what the hash algorithm is (and therefore which key name to search).	keyword
related.ip	All of the IPs seen on your event.	ip
related.user	All the user names or other user identifiers seen on the event.	keyword
rule.id	A rule ID that is unique within the scope of an agent, observer, or other entity using the rule for detection of this event.	keyword
rule.name	The name of the rule or signature generating the event.	keyword
source.address	Some event source addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the `.address` field. Then it should be duplicated to `.ip` or `.domain`, depending on which one it is.	keyword
source.as.number	Unique number allocated to the autonomous system. The autonomous system number (ASN) uniquely identifies each network on the Internet.	long
source.as.organization.name	Organization name.	keyword
source.as.organization.name.text	Multi-field of `source.as.organization.name`.	match_only_text
source.domain	The domain name of the source system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment.	keyword
source.geo.city_name	City name.	keyword
source.geo.continent_name	Name of the continent.	keyword
source.geo.country_iso_code	Country ISO code.	keyword
source.geo.country_name	Country name.	keyword
source.geo.location	Longitude and latitude.	geo_point
source.geo.name	User-defined description of a location, at the level of granularity they care about. Could be the name of their data centers, the floor number, if this describes a local physical entity, city names. Not typically used in automated geolocation.	keyword
source.geo.region_iso_code	Region ISO code.	keyword
source.geo.region_name	Region name.	keyword
source.ip	IP address of the source (IPv4 or IPv6).	ip
source.mac	MAC address of the source. The notation format from RFC 7042 is suggested: Each octet (that is, 8-bit byte) is represented by two [uppercase] hexadecimal digits giving the value of the octet as an unsigned integer. Successive octets are separated by a hyphen.	keyword
source.port	Port of the source.	long
symantec_endpoint.log.action	The action taken on the traffic, e.g. "Blocked".	keyword
symantec_endpoint.log.actual_action	Actual action from risk logs and proactive detection (SONAR) logs.	keyword
symantec_endpoint.log.admin	Name of the SEPM admin.	keyword
symantec_endpoint.log.api_name	API name that was blocked (agent behavior log).	keyword
symantec_endpoint.log.application	The full path name of the application involved.	keyword
symantec_endpoint.log.application_hash	The hash for this application.	keyword
symantec_endpoint.log.application_name	The application name.	keyword
symantec_endpoint.log.application_type	Application type (Trojan, key logger etc).	keyword
symantec_endpoint.log.application_version	The application version.	keyword
symantec_endpoint.log.begin	Start time of the event (also see event.start).	keyword
symantec_endpoint.log.caller_process_id	The ID of the process that triggers the logging.	keyword
symantec_endpoint.log.caller_process_name	The full path name of the application involved. It may be empty if the application is unknown, or if OS itself is involved, or if no application is involved. Also, it may be empty if profile says, "don't log application name in raw traffic log".	keyword
symantec_endpoint.log.caller_return_address	The return address of the caller. This field allows the detection of the calling module that makes the API call. This is historically not used. You can expect Return Address to always be 0.	keyword
symantec_endpoint.log.caller_return_module_name	The module name of the caller. See CallerReturnAddress for more information. Return Module name is historically unused. You can expect Return Module name to always be "No Module Name" except where you see Sysplant when sysplant has started.	keyword
symantec_endpoint.log.category	Agent system log category (generally not populated by SEPM).	keyword
symantec_endpoint.log.category_set	Agent risk log category.	keyword
symantec_endpoint.log.category_type	Agent risk log category type.	keyword
symantec_endpoint.log.certificate_issuer	The certificate's issuer.	keyword
symantec_endpoint.log.certificate_serial_number	The certificate's serial number.	keyword
symantec_endpoint.log.certificate_signer	The certificate's signer.	keyword
symantec_endpoint.log.certificate_thumbprint	The certificate's thumbprint.	keyword
symantec_endpoint.log.cids_signature_id	The signature ID.	keyword
symantec_endpoint.log.cids_signature_string	The signature name.	keyword
symantec_endpoint.log.cids_signature_subid	The signature sub ID.	keyword
symantec_endpoint.log.coh_engine_version	TruScan engine version.	keyword
symantec_endpoint.log.command	Command sent from the SEPM.	keyword
symantec_endpoint.log.company_name	The company name from the application (used in agent risk logs).	keyword
symantec_endpoint.log.computer_name	Name of the host machine (used in agent risk/scan logs).	keyword
symantec_endpoint.log.confidence	The Confidence level that produced the conviction. Examples: High, low, bad, trustworthy etc. "Confidence: There is strong evidence that this file is untrustworthy."	keyword
symantec_endpoint.log.description	Description of the virus file.	keyword
symantec_endpoint.log.detection_score	Score of detection.	keyword
symantec_endpoint.log.detection_source	Source of the detection.	keyword
symantec_endpoint.log.detection_type	Type of detection (e.g. heuristic).	keyword
symantec_endpoint.log.device_id	The GUID of an external device (floppy disk, DVD, USB device, etc.).	keyword
symantec_endpoint.log.disposition	Good / Bad / Unknown / Not available.	keyword
symantec_endpoint.log.domain_name	SEPM domain name.	keyword
symantec_endpoint.log.download_site	The URL determined from where the image was downloaded.	keyword
symantec_endpoint.log.downloaded_by	The creator process of the dropper threat.	keyword
symantec_endpoint.log.duration_seconds	The length of the scan, in seconds.	keyword
symantec_endpoint.log.end	Start time of the event (also see event.end).	keyword
symantec_endpoint.log.event_description	Description of the event. Usually, the first line of the description is treated as the summary.	keyword
symantec_endpoint.log.event_source	The data source. NETPORT, NATSRV, Network Intrusion Protection System, LiveUpdate Manager etc.	keyword
symantec_endpoint.log.event_time	Time of event occurrence.	date
symantec_endpoint.log.file_path	The file path of the attacked file.	keyword
symantec_endpoint.log.file_size_bytes	File size of application.	keyword
symantec_endpoint.log.first_seen	The first seen date for the convicted application.	keyword
symantec_endpoint.log.group	SEPM client group name.	keyword
symantec_endpoint.log.hash_type	Application hash type (MD5, SHA1, SHA256 etc).	keyword
symantec_endpoint.log.infected	The number of files that the scan found that were infected.	long
symantec_endpoint.log.inserted	The time that the event was inserted into the database.	date
symantec_endpoint.log.intensive_protection_level	The High Intensity Detection Level.	keyword
symantec_endpoint.log.intrusion_id	Intrusion ID.	keyword
symantec_endpoint.log.intrusion_payload_url	The URL that hosted the payload.	keyword
symantec_endpoint.log.intrusion_url	The URL from the detection.	keyword
symantec_endpoint.log.ip_address	IP Address of the machine.	keyword
symantec_endpoint.log.last_update_time	The time on the server when the event is logged into the system or updated in the system (GMT).	date
symantec_endpoint.log.local_host	The host name of the client computer.	keyword
symantec_endpoint.log.local_host_ip	The IP address of the local computer.	keyword
symantec_endpoint.log.local_host_mac	The MAC address of the local computer.	keyword
symantec_endpoint.log.local_host_name	The host name of the client computer.	keyword
symantec_endpoint.log.local_port	The TCP/UDP port of the local computer.	keyword
symantec_endpoint.log.location	The location used when the event occurred.	keyword
symantec_endpoint.log.md-5	The MD5 hash value.	keyword
symantec_endpoint.log.network_protocol	Localized string for Others/ TCP/ UDP/ ICMP.	keyword
symantec_endpoint.log.occurrences	The number of attacks. Sometime, when a hacker launches a mass attack, it may be reduced to one event by the log system, depending on the damper period.	keyword
symantec_endpoint.log.omitted	The number of files that were omitted.	long
symantec_endpoint.log.parameters	Parameters is the name of the module, process, registry location or file that was used in the API call. Each parameter was converted to string format and separated by one space character. Double quotation mark characters within the string are escaped with a \ character. As an example, in the SEPM ADC policy you may have a rule with a condition which monitors for Load DLL Attempts with the rule being applied to mscoree.dll. In this case, in the parameters field you'd expect to see C:\Windows\SysWOW64\mscoree.dll.	keyword
symantec_endpoint.log.permitted_application_reason	Reason for allow listing (e.g. Symantec permitted application list, Administrator permitted application list).	keyword
symantec_endpoint.log.policy_name	Name of the policy.	keyword
symantec_endpoint.log.prevalence	Number of users that have seen this.	keyword
symantec_endpoint.log.remote_host_ip	The IP address of the remote computer.	keyword
symantec_endpoint.log.remote_host_mac	The MAC address of the remote computer.	keyword
symantec_endpoint.log.remote_port	The TCP/UDP port of the remote computer.	keyword
symantec_endpoint.log.requested_action	Requested action by policy.	keyword
symantec_endpoint.log.risk_level	The risk level (high, med, low) for the convicted threat.	keyword
symantec_endpoint.log.risk_name		keyword
symantec_endpoint.log.risk_type	Localized strings for Heuristic / Cookie / Admin Black List / BPE / System Change / N/A.	keyword
symantec_endpoint.log.rule	The name of the rule that was triggered by the event. If the rule name is not specified in the security rule, then this field is empty. Having the rule name can be useful for troubleshooting. You may recognize a rule by the rule ID, but rule name can help you recognize it more quickly.	keyword
symantec_endpoint.log.scan_complete	Scan message when scan ended.	keyword
symantec_endpoint.log.scan_id	The scan ID provided by the agent.	keyword
symantec_endpoint.log.secondary_action	Secondary action requested by policy	keyword
symantec_endpoint.log.sensitivity	Engine sensitivity that produced this detection	long
symantec_endpoint.log.server	Name of the server.	keyword
symantec_endpoint.log.server_name	Name of the server.	keyword
symantec_endpoint.log.sha-256	The SHA-256 hash value.	keyword
symantec_endpoint.log.signing_timestamp	The certificate's signature timestamp.	date
symantec_endpoint.log.site	SEPM site name.	keyword
symantec_endpoint.log.source	Scan source (e.g. scheduled).	keyword
symantec_endpoint.log.source_computer	Computer name where this event occurred.	keyword
symantec_endpoint.log.source_ip	IP address of the machine on which the event occurred.	keyword
symantec_endpoint.log.submission_recommended	Recommendation on whether to submit this detection to Symantec.	boolean
symantec_endpoint.log.threats	The number of threats that the scan found.	long
symantec_endpoint.log.total_files	The number of files scanned.	long
symantec_endpoint.log.traffic_direction	Unknown / Inbound / Outbound	keyword
symantec_endpoint.log.url_tracking_status	Network intrusion prevention status	keyword
symantec_endpoint.log.user1	User when scan started.	keyword
symantec_endpoint.log.user2	User when scan ended.	keyword
symantec_endpoint.log.user_name		keyword
symantec_endpoint.log.web_domain	The web domain.	keyword
tags	List of keywords used to tag each event.	keyword
url.domain	Domain of the url, such as "www.elastic.co". In some cases a URL may refer to an IP and/or port directly, without a domain name. In this case, the IP address would go to the `domain` field. If the URL contains a literal IPv6 address enclosed by `[` and `]` (IETF RFC 2732), the `[` and `]` characters should also be captured in the `domain` field.	keyword
url.original	Unmodified original url as seen in the event source. Note that in network monitoring, the observed URL may be a full URL, whereas in access logs, the URL is often just represented as a path. This field is meant to represent the URL as it was observed, complete or not.	wildcard
url.original.text	Multi-field of `url.original`.	match_only_text
url.path	Path of the request, such as "/search".	wildcard
url.scheme	Scheme of the request, such as "https". Note: The `:` is not part of the scheme.	keyword
user.domain	Name of the directory the user is a member of. For example, an LDAP or Active Directory domain name.	keyword
user.name	Short name or login of the user.	keyword
user.name.text	Multi-field of `user.name`.	match_only_text
user_agent.original	Unparsed user_agent string.	keyword
user_agent.original.text	Multi-field of `user_agent.original`.	match_only_text

An example event for log looks as following:

{
    "@timestamp": "2018-02-16T08:01:33.000Z",
    "agent": {
        "ephemeral_id": "88645c33-21f7-47a1-a1e6-b4a53f32ec43",
        "id": "94011a8e-8b26-4bce-a627-d54316798b52",
        "name": "docker-fleet-agent",
        "type": "filebeat",
        "version": "8.6.0"
    },
    "data_stream": {
        "dataset": "symantec_endpoint.log",
        "namespace": "ep",
        "type": "logs"
    },
    "ecs": {
        "version": "8.11.0"
    },
    "elastic_agent": {
        "id": "94011a8e-8b26-4bce-a627-d54316798b52",
        "snapshot": true,
        "version": "8.6.0"
    },
    "event": {
        "action": "Left alone",
        "agent_id_status": "verified",
        "count": 1,
        "dataset": "symantec_endpoint.log",
        "end": "2018-02-16T08:01:33.000Z",
        "ingested": "2023-01-13T12:37:44Z",
        "kind": "event",
        "original": "Potential risk found,Computer name: exampleComputer,Detection type: Heuristic,First Seen: Symantec has known about this file approximately 2 days.,Application name: Propsim,Application type: 127,\"Application version: \"\"3\",0,6,\"0\"\"\",Hash type: SHA-256,Application hash: SHA#1234567890,Company name: Dummy Technologies,File size (bytes): 343040,Sensitivity: 2,Detection score: 3,COH Engine Version: 8.1.1.1,Detection Submissions No,Permitted application reason: MDS,Disposition: Bad,Download site: ,Web domain: ,Downloaded by: c:/programdata/oracle/java/javapath_target_2151967445/Host126,Prevalence: Unknown,Confidence: There is not enough information about this file to recommend it.,URL Tracking Status: Off,Risk Level: High,Detection Source: N/A,Source: Heuristic Scan,Risk name: ,Occurrences: 1,f:\\user\\workspace\\baseline package creator\\release\\Host214,'',Actual action: Left alone,Requested action: Left alone,Secondary action: Left alone,Event time: 2018-02-16 08:01:33,Inserted: 2018-02-16 08:02:52,End: 2018-02-16 08:01:33,Domain: Default,Group: My Company\\SEPM Group Name,Server: SEPMServer,User: exampleUser,Source computer: ,Source IP:"
    },
    "file": {
        "pe": {
            "company": "Dummy Technologies",
            "file_version": "\"3",
            "product": "Propsim"
        },
        "size": 343040
    },
    "host": {
        "hostname": "exampleComputer",
        "name": "exampleComputer"
    },
    "input": {
        "type": "udp"
    },
    "log": {
        "source": {
            "address": "172.27.0.4:34299"
        }
    },
    "process": {
        "executable": "c:/programdata/oracle/java/javapath_target_2151967445/Host126"
    },
    "symantec_endpoint": {
        "log": {
            "actual_action": "Left alone",
            "application_hash": "SHA#1234567890",
            "application_name": "Propsim",
            "application_type": "127",
            "application_version": "\"3",
            "coh_engine_version": "8.1.1.1",
            "company_name": "Dummy Technologies",
            "computer_name": "exampleComputer",
            "confidence": "There is not enough information about this file to recommend it.",
            "detection_score": "3",
            "detection_source": "N/A",
            "detection_type": "Heuristic",
            "disposition": "Bad",
            "domain_name": "Default",
            "downloaded_by": "c:/programdata/oracle/java/javapath_target_2151967445/Host126",
            "end": "2018-02-16 08:01:33",
            "event_time": "2018-02-16T08:01:33.000Z",
            "file_size_bytes": "343040",
            "first_seen": "Symantec has known about this file approximately 2 days.",
            "group": "My Company\\SEPM Group Name",
            "hash_type": "SHA-256",
            "inserted": "2018-02-16T08:02:52.000Z",
            "occurrences": "1",
            "permitted_application_reason": "MDS",
            "prevalence": "Unknown",
            "requested_action": "Left alone",
            "risk_level": "High",
            "secondary_action": "Left alone",
            "sensitivity": 2,
            "server": "SEPMServer",
            "source": "Heuristic Scan",
            "url_tracking_status": "Off",
            "user_name": "exampleUser"
        }
    },
    "tags": [
        "preserve_original_event",
        "symantec-endpoint-log",
        "forwarded"
    ],
    "user": {
        "domain": "Default",
        "name": "exampleUser"
    }
}

Changelog

Version	Details	Kibana version(s)
2.15.0	Enhancement View pull request Update manifest format version to v3.0.3.	7.16.0 or higher 8.0.0 or higher
2.14.2	Enhancement View pull request Changed owners	7.16.0 or higher 8.0.0 or higher
2.14.1	Bug fix View pull request Fix exclude_files pattern.	7.16.0 or higher 8.0.0 or higher
2.14.0	Enhancement View pull request ECS version updated to 8.11.0.	7.16.0 or higher 8.0.0 or higher
2.13.0	Enhancement View pull request ECS version updated to 8.10.0.	7.16.0 or higher 8.0.0 or higher
2.12.0	Enhancement View pull request The format_version in the package manifest changed from 2.11.0 to 3.0.0. Removed dotted YAML keys from package manifest. Added 'owner.type: elastic' to package manifest.	7.16.0 or higher 8.0.0 or higher
2.11.0	Enhancement View pull request Use the ECS syslog fields. Added `log.syslog.appname` and `log.syslog.procid`. Documented `log.syslog.process.{name,pid}` as deprecated. Bug fix View pull request Change `log.syslog.version` field type from long to keyword to align with ECS.	7.16.0 or higher 8.0.0 or higher
2.10.0	Enhancement View pull request Add tags.yml file so that integration's dashboards and saved searches are tagged with "Security Solution" and displayed in the Security Solution UI.	7.16.0 or higher 8.0.0 or higher
2.9.0	Enhancement View pull request Update package to ECS 8.9.0.	7.16.0 or higher 8.0.0 or higher
2.8.0	Enhancement View pull request Ensure event.kind is correctly set for pipeline errors.	7.16.0 or higher 8.0.0 or higher
2.7.0	Enhancement View pull request Use `ip_address` field to populate `related.ip`.	7.16.0 or higher 8.0.0 or higher
2.6.1	Bug fix View pull request Parse all times relative to the configured timezone offset. Bug fix View pull request Rename group_name in policy logs to group for consistency across log types.	7.16.0 or higher 8.0.0 or higher
2.6.0	Enhancement View pull request Update package to ECS 8.8.0.	7.16.0 or higher 8.0.0 or higher
2.5.0	Enhancement View pull request Update package-spec version to 2.7.0.	7.16.0 or higher 8.0.0 or higher
2.4.0	Enhancement View pull request Update package to ECS 8.7.0.	7.16.0 or higher 8.0.0 or higher
2.3.1	Enhancement View pull request Added categories and/or subcategories.	7.16.0 or higher 8.0.0 or higher
2.3.0	Enhancement View pull request Update package to ECS 8.6.0.	7.16.0 or higher 8.0.0 or higher
2.2.0	Enhancement View pull request Add `udp_options` to the UDP input.	7.16.0 or higher 8.0.0 or higher
2.1.1	Bug fix View pull request Remove duplicate fields.	7.16.0 or higher 8.0.0 or higher
2.1.0	Enhancement View pull request Update package to ECS 8.5.0.	7.16.0 or higher 8.0.0 or higher
2.0.1	Bug fix View pull request Remove duplicate field.	7.16.0 or higher 8.0.0 or higher
2.0.0	Enhancement View pull request Make GA	7.16.0 or higher 8.0.0 or higher
1.2.0	Enhancement View pull request Update package to ECS 8.4.0	7.16.0 or higher 8.0.0 or higher
1.1.0	Enhancement View pull request Update package to ECS 8.3.0.	7.16.0 or higher 8.0.0 or higher
1.0.1	Enhancement View pull request Readme - added link to Vendor documentation and improved the wording	7.16.0 or higher 8.0.0 or higher
1.0.0	Enhancement View pull request Make GA	7.16.0 or higher 8.0.0 or higher
0.0.4	Bug fix View pull request Make field values conform to ECS	—
0.0.3	Bug fix View pull request Make field values conform to ECS	—
0.0.2	Enhancement View pull request Add documentation for multi-fields	—
0.0.1	Enhancement View pull request Initial Release	—

On this page

Article navigation

Syslog setup steps

Log file setup steps

Log samples

Administrative Log

Agent Activity Log

Agent Behavior Log

Agent Packet Log

Agent Proactive Detection Log

Agent Risk Log

Agent Scan Log

Agent Security Log

Agent System Log

Agent Traffic Log

Policy Log

System Log

Changelog